3d printing
PiBerry 2.0: A 3D-Printed Cyberdeck Handheld for the Pi Zero 2W
Meet the PiBerry 2.0, an open-source handheld cyberdeck that wraps a Raspberry Pi Zero 2W and a 3.5-inch touchscreen in a 3D-printed modular case.
3d printing
3D-Printed Raspberry Pi Zero 2W Case Adds a 2×16 I2C LCD
A 3D-printable case wraps the Raspberry Pi Zero 2W in a carbon-look shell and adds a 2x16 I2C LCD, so your headless Pi can…
3d printing
Modular 3D-Printed Desk Organizer With Snap-Together iPhone Stand
Free MakerWorld files turn a 3D printer into a custom desk organizer with iPhone stand, pen holder, and snap-in modular tray for any layout.
microcontrollers
Meet the G2 Nano: A 1GHz Dev Board Built for Robotics
The G2 Nano packs a 1GHz Cortex-M7, dual-band Wi-Fi, and a six-axis IMU into a breadboard-sized board built to drive serious multi-motor robotics.
uncategorized
Espressif Reveals CoreBoard and Korvo Dev Kits for ESP32-S31
Espressif's new dual-core RISC-V ESP32-S31 lands with two dev kits: the networking-focused CoreBoard and a camera-and-LCD Korvo board for HMI builds.
robotics
How an ESP32 Turned a LEGO WALL-E Into a Real Working Robot
A maker stuffed an ESP32, Arduino Nano, and custom 3D-printed gears into a LEGO WALL-E set to build a fully drivable robot controlled by…
microcontrollers
M5Stack StopWatch Dev Kit Crams ESP32-S3 Into a Smart Pocket Watch
M5Stack's $45 StopWatch Dev Kit squeezes an ESP32-S3R8, AMOLED touchscreen, 6-axis IMU, RTC, mic and speaker into a pocketwatch-sized maker board.
diy projects
RP2040 Wristwatch Tells Time With a Vintage VU Meter Needle
Meet the one-needle wristwatch that pairs a vintage VU meter with a Raspberry Pi RP2040 to show time, date, and day across printed analog…
community
Meet Chip: The Circuit.Rocks Design Academy Mascot
Say hello to Chip — the curious little CRT-headed robot powering Circuit.Rocks Design Academy. Here's who Chip is, why we made him, and where…
community
Circuitrocks Named Partner of the Year by CvSU Jr. IECEP 2025-2026
Circuitrocks is honored to be recognized as Partner of the Year by the Cavite State University Junior Institute of Electronics Engineers of the Philippines…
3d printing
Cyber-Deco Lamp: A 3D-Printed Mashup of Cyberpunk and Art Deco
A 413mm cyberpunk-meets-art-deco lamp prints in pieces on a Bambu A1 Mini, snaps together, and lights up with a simple USB LED kit.
diy projects
AkiraConsole: ESP32-S3 Handheld for Hacking, RF, and Retro Gaming
Meet the AkiraConsole: an ESP32-S3 handheld packing LoRa, sub-GHz, NFC, and a 2.8-inch LCD for hardware hacking, RF testing, and retro gaming on the…