What happens when neon-soaked cyberpunk vibes collide with the geometric elegance of art deco? You get the Cyber-Deco Lamp — a striking 413mm-tall desk piece that proves 3D printing is more than just brackets and toy figures. Designer NeveroddoreveN dropped the files on MakerWorld, and they are surprisingly easy to throw on a small printer.
The build centres on six interlocking shade leaves that wrap around a central diffuser column. When the light kicks on, the layered fins cast that signature blade-runner shadow pattern across your wall, while the stepped silhouette nods to 1920s skyscraper detailing. It is the sort of lamp that earns a double-take from anyone who walks into the room.
What is under the hood
This project is refreshingly hardware-light. There is no microcontroller, no soldering, and no firmware to flash. The illumination comes from an off-the-shelf USB LED kit that slots into the diffuser, so power is just a standard USB cable into a phone charger or laptop. The geometry is doing all of the heavy lifting here, which is exactly why this design rewards careful printing more than electronics know-how.
Printing tips
Every part fits on the build plate of a Bambu Lab A1 Mini, and no AMS multi-material setup is required. That makes it accessible to anyone with a compact entry-level printer. Use a smooth PEI sheet for the diffuser column to keep the light pattern clean, and consider a single-colour silk or matte filament for the shade leaves to enhance the deco look. Print orientation matters for the interlocking joints, so follow the orientation in the source file before slicing.
Build it yourself
You will need a 3D printer that can handle the included STL files (the A1 Mini is the reference machine), a roll of PLA in your colour of choice, and a USB LED kit for the diffuser. That is genuinely the whole bill of materials. Grab your filament and LED kit from Circuit.Rocks and you can have this on your desk by the weekend.
If you want to remix the design — swap leaf counts, scale it down for a nightlight, or pipe in addressable LEDs for animated effects — the files are open on MakerWorld and ready to fork.
Frequently Asked Questions
What printer does the Cyber-Deco Lamp require?
All parts are sized for the Bambu Lab A1 Mini build plate and print without an AMS multi-material unit, so a compact single-colour printer handles the entire job.
Does this lamp need any electronics or soldering?
No. The light source is a plug-and-play USB LED kit that slides into the diffuser column, so there is no microcontroller, wiring, or firmware involved — just power it from any USB port.
What will I learn if I build this?
You will sharpen your 3D printing workflow: orienting interlocking parts for clean seams, dialling in filament settings for translucent diffusers, and assembling a multi-part print into a finished object. It is a great bridge project between basic prints and full functional builds.
