diy projects
Long-Range Bluetooth LE Mesh on an STM32WB07 Module
An STM32WB07 board with Coded PHY and a 20 dBm amplifier pushes Bluetooth LE to 4.6 km line of sight. Here is how to…
iot & smart home
Nordic nRF54LC10A: One Chip for BLE, Thread, Zigbee and Matter
Nordic's nRF54LC10A puts BLE, Thread, Zigbee and Matter on one low-cost chip. Here is what you need to start building with it before kits…
iot & smart home
NXP’s RW610FML Crams Wi-Fi 6, BLE, and a Cortex-M33 in One Module
NXP's RW610FML packs Wi-Fi 6, Bluetooth LE, and a 260MHz Cortex-M33 into one low-power module built for IoT sensor nodes and student builds.
iot & smart home
SiLabs BG2B: A Low-Power Bluetooth 6 Chip for Your Next Build
Silicon Labs' new BG2B packs Bluetooth 6, Channel Sounding, and a 1.1uA sleep current into one tiny SoC. Here's what you could prototype with…
microcontrollers
SensWear Puts an Open Source Wearable Stack on the nRF54L15
SensWear bundles an nRF54L15 board, swappable PPG, temperature and touch sensor modules, Zephyr firmware and open SDKs to fast-track wearable prototypes.
microcontrollers
Nordic nRF54L15 Discovery: Two Open-Hardware Boards, One PCB
Icy Electronics' nRF54L15 Discovery packs a Cortex-M33, a RISC-V coprocessor, and a snap-off CMSIS-DAP debugger onto one open-hardware PCB for $27.19.